Villa pool maintenance on the Costa del Sol: a year-round guide for owners (2026)

Quick answer

  • Keep the pump and filter running all year: shorter hours in winter, longer in summer.
  • Test pH and chlorine at least weekly in summer and whenever you get back to the villa, and keep pH in the range your equipment maker recommends.
  • A robot cleaner handles the floor, and on many models the walls and waterline, but it doesn’t replace water testing, filter care or someone checking the pool while you’re away.
  • After a calima, start with the skimmers and the filter, wait for the dust to settle, and only then run the robot.

If you’ve moved here from the UK, you’ll soon notice that a pool on the Costa del Sol is a different animal. Summers are long and hot, the water warms up and the chlorine works harder. Every so often a calima drops a layer of reddish Saharan dust over everything. Your mains water may be hard, which shows up as limescale on the tiles at the waterline. And many of us aren’t here all year, or we let the villa to holidaymakers, so the pool has to look after itself for weeks at a time.

This guide is the routine I’d suggest to any villa owner in Málaga province or elsewhere in Andalucía. Where I give figures, they come from Spanish government sources or from equipment makers’ own manuals, and I say which. Where official sources disagree, I say so.

Season by season

Spring start-up (March to May)

Spring is when you get the pool back to swimming condition after the quieter months.

  • Clean out the skimmer baskets and the pump pre-filter, then backwash or clean the main filter.
  • Top up the water to the middle of the skimmer opening.
  • Test the water and balance pH first, then chlorine. pH affects how well chlorine works, so it comes first.
  • If you have a salt chlorinator, check the salt level against your unit’s manual before switching it on.
  • Gradually increase the pump hours as the water warms up.
  • Give your robot cleaner a once-over before its first run: brushes, tracks, cable or battery. Our guide to robot cleaner maintenance covers this step by step.

Summer peak (June to September)

This is when the pool works hardest. Warm water, sun, sun cream and more swimmers all use up chlorine faster.

  • Run the pump for longer each day. Your pool company or equipment manual can tell you how long for your volume and pump.
  • Test pH and chlorine at least weekly, and more often in a heatwave or after a busy weekend.
  • Empty the skimmer baskets often, especially if you have trees, palms or bougainvillea nearby.
  • Run the robot regularly and empty its basket after every cycle.

Autumn (October to November)

Here, autumn is often warm enough to keep swimming, but it’s also when leaves fall and the first storms arrive.

  • Keep emptying skimmers: falling leaves are the main job now.
  • Reduce pump hours gradually as the water cools.
  • After heavy rain, test the water. Rain dilutes the chemicals and, with a salt chlorinator, the salt level.
  • Decide on your winter plan: keep the pool running, or cover it.

Winter (December to February): keep it running or cover it?

Most villa pools on the coast are never fully closed. Frost is rare at sea level, and it’s usually easier to keep the water ticking over than to bring a green pool back in spring.

Keeping it running means fewer pump hours, regular chlorine and pH checks, and the occasional robot cycle. Bear in mind that robots climb walls less well in cold water: Maytronics, for example, notes in its Dolphin manuals that climbing can be affected below 15 °C. Zodiac’s eXO iQ manual says the chlorinator reduces chlorine production at 15 °C or below and stops it at 10 °C or below; its salt-pool advice also says to switch the unit off below 10 °C during active winterizing.

Covering it with a winter cover keeps out leaves and dust and cuts evaporation, but you still need to check the water and run the pump occasionally. Inland, in the hills or at altitude, frost is more likely, so ask your pool company whether any pipework or equipment needs protecting.

If you’re putting the robot away for the winter, clean it, dry it and store it out of the sun. Cordless models should not be stored with a flat battery: follow the charge level in your own manual, because the brands don’t all give the same figure.

What a robot cleaner does and doesn’t do

A robot cleaner is the single biggest time-saver for a villa pool. It vacuums the floor and, depending on the model, scrubs the walls and the waterline, collecting dirt in its own basket instead of sending it to your pool filter.

What it doesn’t do is just as important:

  • It doesn’t test or balance your water.
  • It doesn’t clean the skimmers, the pump pre-filter or the main filter.
  • Most models don’t skim floating leaves from the surface, although some higher-end ones do.
  • It won’t notice a leak, a pump fault or a cloudy pool.

For owners who pay a pool man, a robot can reduce how much vacuuming and brushing they need to do on each visit. Whether that lowers your bill depends on your contract, so it’s worth asking your pool company directly.

Cordless or corded?

Corded robots plug into a control box near the pool. They can run for as long as the cycle lasts without worrying about battery level, but you have a floating cable to manage and the box needs a nearby socket.

Cordless robots run on a battery. There’s no cable in the pool, which makes them easy to drop in and lift out, but you need to remember to charge them and battery runtime limits each cycle.

For villas let to holidaymakers, many owners prefer a model that’s easy to drop in and lift out. We compare specific models in our guide to the best robot pool cleaners for Costa del Sol villas.

Check the current price on Amazon

When you’re away

Before you leave

  • Balance pH and chlorine, and make sure the chlorine supply (tablets, liquid dosing or salt chlorinator) will last until someone next checks it.
  • Set the pump timer for the season, not for when you’re there.
  • Clean the skimmers, pre-filter and main filter.
  • Clean the robot and either take it out and store it, or leave clear instructions on when to run it. Whether it can stay in the water depends on the model: Maytronics and Aiper generally want it out after the cycle, while some models, such as the WYBOT C1, are designed to stay in the pool. Check the manual.
  • Top up the water level, as evaporation in summer can be significant.
  • Leave the pool company or neighbour your contact details, a spare key and a note of where the chemicals and test kit are kept.

What to ask your pool company or neighbour to check

  • That the pump is running and the timer is still set correctly, especially after a power cut.
  • Water level, clarity and colour.
  • pH and chlorine, with a quick message or photo of the test results.
  • Skimmer baskets and pump pre-filter.
  • That the pool is clean after any calima or storm.

If the villa is let, add a check between guests.

Calima and Saharan dust: what to do after a dust storm

Saharan dust episodes are common in Spain. AEMET, the Spanish state weather agency, describes mineral-dust intrusions from the Sahara as a frequent, natural phenomenon in this part of the world, and it publishes forecasts of dust concentration. When a calima comes through, often with rain that turns it into mud, it leaves a fine layer of dust on the water and on the pool floor.

The order matters more than doing it quickly. While the dust is still falling, don’t start a deep clean: use a cover if you have one, and empty the skimmers if they fill up. Once it eases:

  • Clear what is floating, then empty the skimmer baskets and the pump pre-filter. Wipe the waterline before the mark dries in the sun.
  • Test pH and chlorine, and backwash or clean the main filter if the pressure has risen.
  • Wait for the dust still in the water to settle. The water should look clearer, with the dirt on the floor, before you touch the bottom.
  • If the layer on the floor is thick, vacuum it slowly to waste, not through the filter, and don’t put the robot on that layer yet.
  • When only a fine residue is left, run the robot with the finest filter it takes, and empty the basket mid-cycle if it clogs. A second cycle often helps.
  • Top the water back up and test again.

We cover this in more detail, in Spanish, in our guide to cleaning your pool after a calima.

Water chemistry in plain English

pH

pH measures how acidic or alkaline the water is. If it’s too high, chlorine works less well and limescale forms more easily. If it’s too low, the water can irritate eyes and damage equipment. For the pools it covers, Spain’s pool regulation, Real Decreto 742/2013, sets a range of 7.2 to 8.0 in Annex I. Zodiac’s water-treatment advice says the ideal is 7.2 to 7.4, while its eXPERT chlorinator manual recommends 7.0 to 7.4. Always check what your own chlorinator and robot manuals recommend, because some robot limits are tighter than the official range at the top end.

Chlorine

Chlorine keeps the water free of bacteria and algae. The same regulation sets free chlorine at 0.5 to 2.0 mg/L for the pools it covers. It applies to public-use pools, including hotels and tourist accommodation. A pool at a house rented for family use is treated as private, but pools at tourist accommodation are listed separately, with more requirements. A single-family private pool (type 3B) only has to meet the article on incidents; community pools, rural houses and similar (type 3A) must also meet the Annex I values. Which applies to a holiday-let villa can depend on how it is registered, so ask your town hall or a local pool company. Even in a private family pool, the Annex I figures are a useful reference.

Robot makers also set limits. Maytronics’s Dolphin manuals give a maximum chlorine of 4 ppm and a pH of 7.0 to 7.8. Zodiac’s MX manual asks for chlorine below 3 mg/L and pH between 6.8 and 7.6. Beatbot’s official pages don’t all agree: its European help centre mentions chlorine up to 4 ppm on at least one model FAQ, while its guide to using a robot after a shock treatment asks for free chlorine of 5 ppm or less and a pH of 7.2 to 7.8. Stay within your own robot’s manual, and remember that the official pH range goes up to 8.0, which is above both the Dolphin and Zodiac MX limits.

Hard water and limescale

If your mains water is hard, calcium can leave white deposits on tiles and inside equipment. Zodiac’s TRi Expert chlorinator manual gives a recommended calcium hardness (TH) of 10 to 30 °f, which is 100 to 300 ppm. Your local water company publishes hardness figures for your area, and your pool company can test the pool itself.

Salt chlorinators

A salt chlorinator turns a low level of dissolved salt into chlorine as the water passes through its cell. According to Zodiac, the salt level is between 2 and 5 g/L depending on the model. Many of its standard units, such as the eXO iQ and the Ei, work at 4 g/L, and its low-salt versions are listed at 2 g/L (with a minimum of 1.6 g/L on the eXO iQ). Salt isn’t used up, but rain, backwashing and topping up dilute it, so check it regularly.

If you have a salt pool, check your robot’s limits too. Dolphin manuals and Beatbot’s help centre both give a maximum of 5,000 ppm, which is 5 g/L. That is within the usual range, but a pool run at the top end is close to the limit. If you’re weighing up a salt system against traditional chlorine, our guide on salt chlorinators versus chlorine walks through the pros and cons.

WhatFigureSource
pH (pools covered by the regulation)7.2 to 8.0Real Decreto 742/2013, Annex I
Free chlorine (pools covered by the regulation)0.5 to 2.0 mg/LReal Decreto 742/2013, Annex I
Ideal pH (Zodiac advice)7.2 to 7.4 (eXPERT manual: 7.0 to 7.4)Zodiac Spain
Salt level for salt chlorinators2 to 5 g/L depending on model (many standard units 4 g/L)Zodiac Spain
Calcium hardness100 to 300 ppm (10 to 30 °f)Zodiac TRi Expert manual
Robot limits: DolphinChlorine up to 4 ppm, pH 7.0 to 7.8, salt up to 5,000 ppmMaytronics manual
Robot limits: Zodiac MXChlorine below 3 mg/L, pH 6.8 to 7.6Zodiac MX8 manual
Robot limits: BeatbotSalt up to 5,000 ppm; chlorine 4 ppm in the help centre, or 5 ppm free chlorine after shock treatmentBeatbot (official pages disagree)

FAQ

How often should I test the water?

At least weekly in summer, after heavy rain or a calima, and every time you or your guests arrive. In winter, every couple of weeks is usually enough if the pump keeps running. This is practical advice, not a legal requirement for a private family pool.

Can I leave the robot in the pool while I’m away?

It depends on the model, so check the manual. Maytronics and Aiper generally want the robot out after the cycle; some models, such as the WYBOT C1, are designed to stay in the water. Cordless robots, unless they have a charging dock, have to come out to be charged anyway. We go through the brand-by-brand differences in our guide to robot cleaner maintenance.

Do I still need a pool man if I buy a robot?

If you’re away for long periods or let the villa, yes, in most cases. The robot keeps the pool clean, but someone still needs to check the water, the filter and the equipment.

Is it better to keep the pool running in winter or close it?

On the coast most owners keep it running with fewer pump hours, as frost is rare. Inland or at altitude, ask your pool company about frost protection.

Sources

  • Real Decreto 742/2013, technical and health criteria for swimming pools (BOE, consolidated text): boe.es and PDF
  • AEMET, Saharan mineral dust intrusions: aemet.es
  • Zodiac Spain, pool water treatment (ideal pH 7.2 to 7.4; standard salt 4 g/L): zodiac-poolcare.es
  • Zodiac Spain, salt pool maintenance (salt 2 to 5 g/L; switch off below 10 °C): zodiac-poolcare.es
  • Zodiac eXPERT salt chlorinator manual (Fluidra, 2026; pH 7.0 to 7.4): dam.fluidra.com (PDF)
  • Zodiac Spain, eXO iQ salt chlorinator manual (salt levels; production reduced at 15 °C and stopped at 10 °C): zodiac-poolcare.es (PDF)
  • Zodiac Spain, Ei salt chlorinator manual: zodiac-poolcare.es (PDF)
  • Zodiac Spain, TRi Expert chlorinator manual (calcium hardness 10 to 30 °f): zodiac-poolcare.es (PDF)
  • Zodiac Spain, MX8 manual (water conditions for the robot): zodiac-poolcare.es (PDF)
  • Maytronics, Spanish user manual (water conditions, climbing below 15 °C, storage): brand.maytronics.com (PDF)
  • Beatbot Europe, help centre (salt up to 5,000 ppm; chlorine up to 4 ppm on one FAQ): eu.beatbot.com
  • Beatbot, using a robot after shock treatment (free chlorine 5 ppm or less; pH 7.2 to 7.8): beatbot.com
  • Aiper, leaving a robot in the pool: aiper.com
  • WYBOT Europe, C1 (FAQ on storing the robot in the water): eu.wybotpool.com

As an Amazon Associate I earn from qualifying purchases.

Publicaciones Similares

Deja una respuesta

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *